Basimilus Iteritas#

Spectral synthesizer designed for intuitive control over unique tones

Cursus Vereor's interface

Overview#

Basimilus Iteritas is a parameterized digital drum synthesizer with its roots in the analog world. At its heart, it is a simple six-oscillator additive/FM synthesizer with adjustable waveforms, harmonic spread, and envelope timing, with a noise oscillator added in for added percussive variety. Sounds are fed into an infinifolder, Noise Engineering’s take on the classic wavefolder, for crunch and variety. Add to that a powerful modulation system and extensive MIDI control, and you have a synth that you’ll want to use on every track.

Installation#

Windows#

Log into portal.noiseengineering.us Navigate to the “Plugins” tab, and click the link that says “Download for Windows” Double-click the downloaded file to run it. NE Products will use your web browser to authenticate your plugins. Log into your Portal account on the webpage that opens if prompted, then return to NE Products. Click on “Install/Update Plugins”. Close NE Products, run your DAW, and your plugins will appear!

Mac#

Log into portal.noiseengineering.us Navigate to the “Plugins” tab, and click the link that says “Download for Mac” When the download completes, open the installer file and follow the instructions. Open NE Products. On Mac, it can be found with Finder in Applications or with Spotlight. NE Products will use your web browser to authenticate your plugins when you run it. Log into your Portal account on the webpage that opens if prompted, then return to NE Products. Click on “Install/Update Plugins”. Once plugins are installed, the message at the top of the screen will display “Your plugins are up to date.” Close NE Products, run your DAW, and your plugins will appear!

Ableton Live troubleshooting
If you've installed your plugins but they aren't showing up in Ableton Live, please open Live, navigate to the Plugins tab in Preferences, and make sure that Use VST3 Plug-In System Folders is turned to On.

Uninstallation#

Run NE Products again, and click “Uninstall Plugins.” If you’d like to also remove their preset files, click “Uninstall Plugins and Presets.” Doing this removes all presets in the factory directories, including user-created presets, so please copy any files you’d like to save to a different location before performing this action.

Plugin Locations#

Plugin presets install to the following locations:

Windows
C:\Users\Public\Documents\Noise Engineering\
Mac
/Users/[name]/Library/Audio/Presets/Noise Engineering/

Noise Engineering plugins are installed to the default locations for the specified plugin formats. In a majority of cases, plugins will not need to be moved. In the rare instance that you need to move your VST plugins, find them in the following locations:

Windows
C:/Program Files/Common Files/VST3/Noise Engineering/
Mac
/Library/Audio/Plug-Ins/VST3/

Note that AU and AAX plugins cannot be moved. For reference, they are installed here:

Mac AU
/Library/Audio/Plug-Ins/Components/
Mac AAX
/Library/Application Support/Avid/Audio/Plug-Ins/Noise Engineering/
Windows AAX
C:/Program Files/Common Files/Avid/Audio/Plug-Ins/Noise Engineering/

Shortcuts#

Cmd/Ctrl+Click or Cmd/Ctrl+Mouse wheel
For finer control, hold Cmd (Mac) or Ctrl (PC) while moving a parameter.
Double click
Resets any parameter to its default state.
Scroll
Hover over any parameter and scroll to adjust. Scroll+Cmd (Mac) or Scroll+Ctrl (PC) give finer control.

All of these work to edit step levels in LFO Step shape as well.

Basimilus History#

The story of Basimilus Iteritas started way back in 2015, with the release of a Eurorack module by the same name. It was a smash hit, and was later followed by Basimilus Iteritas Alter. The BIA, as it’s often called, has made it into the Eurorack systems of countless artists and can be heard in tracks spanning most any genre. Now, with the Basimilus Iteritas plugin, you get the same sound creation tools as the module, with the added power of polyphony, presets, and MIDI control. Dive in and start tweaking, or load up some presets and see where they take you.

Tone page#

Basimilus Iteritas's timbre controls

Volume
Sets the output level of the plugin.
oct
Transposes the synth up or down by octaves.
semi
Transposes the synth up or down by semitones.
cent
Transposes the synth up or down by cents.
Mode
Selects the mode:
  • Skin: Six-oscillator additive
  • Liquid: Six-oscillator additive with pitch envelope
  • Metal: Two 3-operator phase-modulated oscillators

See the Tone Generation section for more information.

Attack
Sets the attack for all oscillators. When left of center, noise is added. When deadcenter, a classic analog-style pop is produced. When right of center, the slider slows the attack.
Decay
Sets the decay time for all oscillators.
Harmonics
Controls the harmonic decay of the oscillators. Fully left, the sound produced is a single harmonic tone, simulating many simple analog bass drums. From there to the first quarter, a second tone fades in. The remaining range extends first the decays and then the amplitudes of the other four harmonics.
Spread
Sets the frequency spacing of the oscillators. This allows the overtone series to vary from purely harmonic to very inharmonic.
Morph
Controls the waveform of all oscillators, blending through sine, triangle, saw, and square continuously.
Fold
Controls the infinifold section. For the first 3/4 of the range, this sets the threshold of the folder. BI will dynamically add multiple stages to maximize the amount of folding based on the threshold and signal amplitude. When the control is in the top quarter of its range, a pulse train based on the signal is mixed in to give even more harmonic content.
Velocity
Toggles whether or not the synth’s dynamics change based on velocity.

Presets#

Presets are stored in the computer’s file system, and the controls below allow for modification and navigation through the files and folders of presets. You can create a new preset Category by creating a subfolder in the preset directory, and saving new presets within it.

load
Load a preset.
save
Save a new preset.
< > (category)
Loads the next/previous folder of presets in the preset directory.
< > (preset)
Loads the next/previous preset.
nudge
Applies a small amount of randomization to all tonal parameters and modes. Randomization can be bypassed per control in individual parameter modulation menus. Useful for creating slight variations of sounds.
rand
Completely randomizes all tonal parameters and modes. Randomization can be bypassed per control in individual parameter modulation menus. Use this to create inspiring new sounds and ideas.
reset
Resets all parameters to their default settings.
shhh
Panic button; ends all notes.

Modulation#

All Noise Engineering plugins feature a comprehensive routing system making use of a variety of modulation types and sources. When modulation is enabled on a parameter, a box showing the range of enabled modulation will appear, and a small indicator will move within the range box showing the exact position of the modulation.

A slider with modulation enabled

Types of modulation#

Parameters can be modulated from a variety of sources:

LFOs
Four onboard LFOs that offer a variety of modes, from simple waveforms to envelopes to step sequencers. More detail on LFO modes can be found in the section below titled Modulation Page.
Mac 1-4
Macros. Four macro sliders can be assigned to any number of parameters. The macros can in turn be mapped to MIDI controllers, automated, or modulated with other LFOs.
Note
Changes value based on what note is currently played; the note range can be changed in Modulation > Other.
Env
Envelope. The onboard dynamics envelope of the synth. The modulation range of the envelope can be adjusted with the Envelope Index control on Modulation > Other.
Pressure
MIDI pressure. The modulation range of pressure can be adjusted with the Pressure Index control on Modulation > Other
Vel
MIDI note velocity.
Off Vel
Release velocity/off velocity; the velocity value when the note is released.
Slide
MIDI MPE slide.
Random
A random value that is generated for each note.
Learn CC
Parameters can be assigned to MIDI CC. MIDI Learn must be enabled on Config > MIDI.

Modulation Assignment#

When a parameter is right-clicked (Control+click on Mac), a context menu appears with modulation routing options:

The context menu for modulation assignment

Parameter slider
A copy of the parameter being modulated, for easy adjustment.
QT (Pitch only)
Quantizes the incoming modulation to semitone values when checked. Only appears when modulating the Pitch parameter.
On
Each modulation source has a checkbox; when checked, modulation from that source is enabled.
Index
Sets the amount of modulation from a particular source. Fully left, modulation is bypassed.
Dir
Direction. Sets the polarity and inversion of incoming modulation.
  • --> (unipolar): modulates from the point selected on the parameter up to the level indicated by the Index setting
  • <-> (bipolar): modulates around the center point set by the parameter
  • <-- (inverted unipolar): opposite modulation from unipolar
  • >-< (inverted bipolar): opposite modulation from bipolar
Curve
Each modulation source has a Curve slider that changes how modulation affects the parameter. In the center, modulation is linear, and the parameter movement matches incoming modulation exactly. To the right modulation is more logarithmic, and to the left more exponential.
Allow Randomize
When checked, this parameter can be randomized when “rand” (Tone page) is clicked.
Learn CC
Click this to enable MIDI CC learn on a parameter. Move a parameter on your MIDI controller and the plugin will exit learn mode and the parameter will now respond to that CC. If clicked by mistake, click Waiting on CC to exit learn mode. Click Forget CC to remove an assignment.
For this button to be visible, MIDI Learn must be enabled on Config > MIDI.
Clear modulation
Resets modulation checkboxes, amounts, direction, and curve. Does not affect CC assignments.

Modulation Page#

Click the modulator names in the left column to navigate to that modulator's page and edit settings. The Mods subtab shows modulator settings, and the Route subtab shows modulator routings.

The LFO page

LFO 1-4#

Index
Sets the modulation range of the LFO.
Type
Sets the type of LFO. Options include Wave, Step, and ADR, described in detail in the sections below.
Sync
Sets the source of timing for the modulator. * Free: A single completely freerunning LFO; never resets. * Transport: Speed is set in seconds, but the LFO follows the transport of the DAW. * Tempo: A single LFO that is synced to the DAW’s tempo and transport. * Poly Free: Each note played gets its own LFO; LFOs are reset at the start of each note. * Poly Tempo: A tempo-synced LFO is created per note; LFOs reset at the start of each note.
Reset LFO
Resets the LFO back to its default state, respecting Type.

Type: Wave#

The LFO page with a Wave LFO selected

Speed/Beats
Sets the rate of the LFO. In unsynced modes, this is a slider that sets the rate in seconds. In synced modes (Tempo and Poly Tempo), this is a fraction that sets the rate in beats (for example, 4/1 would be equal to 1 bar in 4/4 meter). If a synced mode is selected, the rate can be doubled or halved with the *2 and /2 buttons respectively.
Shape
Morphs between different waveforms.
saw/sin/tri/sqr/was
Selects a shape preset for the waveform. Choose saw, sine, triangle, square, or inverted saw.
Phase
Changes the starting point of the wave.
0/90/180/270
Selects a preset for the phase of the waveform.
Time Warp
Skews the timing of the waveform.
Noise
Adds randomness to the waveform.
Color
Only visible when Noise is above minimum. Changes the intensity of randomness added to the waveform.

Type: Step#

The LFO page with a Step LFO selected

Speed/Beats
Sets the rate of the sequencer. In unsynced modes, this is a slider that sets the rate in seconds. In synced modes, this is a fraction that sets the rate in beats (for example, 4/1 would be equal to 1 bar in 4/4 meter). If a synced mode is selected, the rate can be doubled or halved with the *2 and /2 buttons respectively.
Count
Sets the steps in the sequencer; the up and down arrows change the count by one, and the *2 and /2 buttons respectively double or halve the count.
Smooth
Adjusts how smooth the transition between steps is.
Time Warp
Skews the timing of the sequencer.
Random
Adds per-step randomization to the sequence.
Graph
Edit your sequence here by clicking and dragging or use the preset buttons:
  • rand: Randomizes the sequence entirely.
  • nudge: Slightly changes the values of each step.
  • up: Generates an ascending pattern across the steps.
  • dn: Generates a descending pattern across the steps.
  • ud: Creates a triangle pattern across the steps.
  • du: Creates an inverted triangle pattern across the steps.

Type: ADR#

The LFO page with an ADR LFO selected

Polyphony
When checked, a new envelope is created for each voice. When unchecked, a single envelope is generated for all voices.
Loop
When set to once, the envelope goes through a single cycle per note press. When set to loop, the envelope will loop as long as a note is playing.
Attack
Controls the attack time for the envelope; this sets the amount of time it takes the envelope to go from minimum to maximum.
Decay
Controls the decay time for the envelope; this sets the amount of time it takes the envelope to go from the peak reached in the Attack stage to the level set in the Sustain stage.
Sustain
Sets the sustain level of the envelope; this is the level the envelope reaches after the Attack and Decay stages before moving to the Release stage.
Release
Sets the release time for the envelope; this is the amount of time it takes the envelope to go from the Sustain level to minimum.
Slope
Sets the curve of the envelope with linear in the center.

Macro#

The Macro page

Mac 1-4
Four sliders that can be assigned to any number of other parameters, and modulated by LFOs or MIDI CCs.

Other#

The Other page

Note
An indicator of the current Note modulator value.
Start
Sets the lowest note in the Note modulator range. Notes below this give the minimum value.
Interval
Sets the highest note in the Note modulator range. Notes above this give the maximum value.
Envelope
An indicator of the current Envelope modulator value.
Index
Sets the range of the Envelope modulator.
Pressure
An indicator of the current Pressure modulator value.
Index
Sets the range of the Pressure modulator.
Velocity
An indicator of the current Velocity modulator value.
Off Vel
An indicator of the current Off Velocity modulator value.
Slide
An indicator of the current Slide modulator value.
Random
An indicator of the current Random modulator value.

Clear#

The Clear page

Clear All Modulation
Clicking this removes all modulation routings from the patch. Use it wisely.
Clear All CC Assignments
Clicking this clears all MIDI CC mappings.

Modulated parameters tab#

When a modulator (LFO, Macro, or Other) is assigned to a parameter, the parameter will appear in this list when on that modulator’s page. For instance, if LFO 1 is modulating Attack, click LFO 1 on the left side to view the modulation amount, curve, and checkbox for Attack (and any other LFO 1 modulated parameters) on the right.

The modulated parameters column

Group
Selects a category of parameters, grouped by location in the interface. For example, the Fold parameter is in the Oscillator group.
Param
Selects a parameter from the current Group category.
Add Route
Adds modulation routing for the selected parameter from the selected modulator.
Clr Routes
Click twice to remove all modulation assignments for the current modulator. To remove a single assignment simply uncheck the On box.
Add Rand
Adds a random modulation destination.
QT (Pitch only)
Quantizes the incoming modulation to semitone values when checked. Only appears when modulating the Pitch parameter.
On
Each modulation source has a checkbox; when checked, modulation from that source is enabled. When unchecked on this page, it is removed.
Index
Sets the amount of modulation from a particular source. Fully left, modulation is bypassed.
Dir
Direction. Sets the polarity and inversion of incoming modulation:
  • --> (unipolar): modulates from the point selected on the parameter up to the level indicated by the Index setting
  • <-> (bipolar): modulates around the center point set by the parameter
  • <-- (inverted unipolar): opposite modulation from unipolar
  • >-< (inverted bipolar): opposite modulation from bipolar
Curve
Each modulation source has a Curve slider that changes how modulation affects the parameter. In the center, modulation is linear, and the parameter movement matches incoming modulation exactly. To the right modulation is more logarithmic, and to the left more exponential.

Config Page#

Voicing tab#

The voicing page

Tuning of A4
Offsets the base pitch of the synthesizer; defaults to contemporary “concert pitch” (A=440hz).
12-tet
Sets the pitch scaling of the plugin to the default twelve-tone equal temperament tuning.
Load .scl
Allows the user to load Scala files for different tuning systems.
Polyphony
Sets the maximum number of simultaneous voices the plugin can play.

Interface tab#

The interface page

Size
Sets the size of the plugin window.
Hue
Sets the color scheme of the plugin.
Fire
Adds some attitude to the plugin GUI.
Static
Adds some retro flare to the plugin GUI.
Light Mode
Inverts the plugin GUI.
Tooltips
Enables helpful tooltips when you mouse over parameters.
Enable scroll wheel
Allows parameters to be edited with the mouse wheel.

MIDI tab#

The MIDI page

MIDI Learn
Enables MIDI mapping (right-click/cmd-click a parameter to bring up the modulation menu and click Learn CC).
MPE
Enables MPE control within the plugin.
Bend Range
Sets the pitch bend range in semitones.
MPE Bend Range
Sets the range of MPE pitch bend in semitones. Most controllers and DAWs expect the default value of 48 semitones.

Help tab#

The Help page

Get Manual
Opens the plugin product page.
I Need Help
Uploads anonymized system information used for troubleshooting and opens the support form. If you’re having an issue please press this button and fill out the form to tell us what the problem is! You can also always reach us at noiseengineering.us/pages/contact. Drop us a line and we’ll get back to you within two business days.
See All NE Plugins
Opens the plugin shop. Check out all the Noise!

Tone generation#

Basimilus Iteritas uses six tonal oscillators and one noise oscillator in three configurations to generate sound. The Skin setting is a basic additive synthesizer meant to simulate instruments that have modes that do not interact.The first oscillator frequency is determined by the pitch input. Liquid is the same as skin but with a pitch envelope for all oscillators. The Metal setting modulates the oscillators by each other to simulate instruments that have a lot of modal interaction. The Spread control adjusts the pitch (relative to the base pitch) of the other five oscillators.

Each oscillator has an individual envelope that is controlled by the Attack, Decay and Harm controls. The noise envelope is also affected by the Attack knob.

The oscillators are summed and then the Attack envelope is applied to the sum. This then feeds into a threshold-reflection folder with amplitude compensation and the ability to dynamically add more fold stages. At very high settings the fold will add in an exponentially decaying pulse at the local minima and maxima of the signal to add a gnarly buzz.

The final step is another envelope. This envelope is derived from the overall shape of the six oscillator envelopes. It adds back in the dynamics lost by folding so the output remains punchy, even under the most extreme folding.

About NE#

Noise Engineering is located in Los Angeles, California. We started around 2014 when Chief Noisemaker Stephen McCaul wanted a hobby for his off time from his day job and started making Eurorack modules in a spare bedroom at home. One thing led to another and a couple of years later, he and wife Kris Kaiser quit their day jobs and took the company full time. Noise Engineering has since grown in size and has established itself as a well-regarded and innovative synthesizer brand, with products in Eurorack, 5U, and multiple software platforms.

Special thanks#

  • Starthief
  • René G. Boscio
  • Matt Lange
  • Greg Chin
  • Rhys Fulber
  • James Tobias
  • Hans Besselink
  • Douglas Hill
  • Josh Sager
  • Yugo Oshima
  • Aldo Lamana
  • Stephen Wey